ATSHOCK 25
Single-pole and pluggable protection for power supply lines.
Technical data
- Type 1 and 2 protectors according to EN 61643-11 and GUIA-BT-23
- Gas discharge tube inside.
- Double connection in order to facilitate wiring (limited to 63 A).
- Possibility of connection to M5 fork terminal.
- Suitable for TT, TN-C and TN-S systems.
- Can be coordinated with other ATSUB and ATCOVER series protectors.
- Quick response.
- Single-pole protection. Withstands direct lightning strike current (10/350 wave) up to 25 kA.
- Limits following current supply.
- Thermodynamic control device and visual alarm.
- Test button for checking protector status. Green light indicates correct operation. If not, replace.
- This indicator does not generate any fault current during normal operation.
- Complies with IBERDROLA requirements for type 1 overvoltage protection on the Meter Board.
- ATSHOCK series protectors have been tested in official, independent laboratories obtaining their characteristics according to applicable standards.
Selection filters: Select product resources
Listado de productos según su selección
Reference | Name |
---|