Family - Aplicaciones Tecnológicas

Family

ATPLUG CONTROL

Plug-in self-reclosing permanent and transient overvoltage and undervoltage protector.

Technical data

  • ATPLUG CONTROL series protectors actuate when they detect a permanent overvoltage or low voltage, disconnecting the power to the outlet. This SPD is plugged directly in the same socket as the load to be protected. When the permanent overvoltage or low voltage come to a halt, the protector reconnects the power supply to the load.
  • The warning system for permanent overvoltages consists of two luminous indicators: green (correct power supply) and red (overvoltage). It has a test button to check that installation has been executed correctly.
  • ATPLUG ATCONTROL protectors also actuate when they detect a transient overvoltage, driving the current to earth and reducing the voltage to a level that does not damage the connected equipment.
  • Tested and certified as a type 3 protector in official and independent laboratories according to standards UNE-EN 61643-11 and GUÍA-BT-23 from the REBT. Suitable for categories I, II, III and IV equipment according to the REBT.
  • It has a thermodynamic control device that disconnects from the electrical network in case of deterioration, and also a warning system for transient overvoltages. When the green pilot light is lit up, the protector is in good working condition. If not, replace.
  • ATPLUG CONTROL series protectors have been tested in official, independent laboratories obtaining their characteristics according to applicable standards.

Selection filters: Select product resources




Listado de productos según su selección

Reference Name

START TYPING AND PRESS ENTER TO SEARCH