DATASHEET
PRODUCT DESCRIPTION
ø¾" x 3000 mm copper coated steel earth rod, electrolytically coated with 254 μm copper, unthreated.
Copperbond earth rods of a high quality which comply with even the most demanding regulations in order to achieve long-lasting earthing.
Electrolytically coated with copper which is 254 µm thick and 99.9% pure, with a proven resistance to corrosion. This type of electrolytic coating prevents cracks or fissures, which may be caused in the outer layer of the earth rods with mechanical coating.
DATASHEET
| Reference | AT-029H |
| Dimensions | ø17.28 x 3000 mm |
| Shape | Unthreated |
| Ø minimum | 17.28 mm |
| Materials | Copperbond steel (254 µm) |
| Weight | 5566 g |
| Standards | Complies with BS 7430, UL 467, IEC 62305, NFPA 780, UNE 21186, NF C 17-102 |
TESTS AND CERTIFICATIONS
Diagram (mm)
L = 3000 mm
INSTRUCTIONS
INSTALLATION
The electrodes should be placed at a depth of at least 50 cm.
It is preferable to use several conductors conveniently spread out rather than one very long conductor. In the case of an earthing system made up of various interconnected electrodes, it is recommended that:
· The buried earth rods must be placed in a triangle or line and spaced out at a distance of at least that of their buried depth.
· The buried earth rods are connected by an identical or compatible conductor to the one used for the down-conductor.
· The conductor joining the earth rod should be buried at a depth of at least 50 cm.
· Apply the ground enhancing product CONDUCTIVER PLUS (AT-010L) to the buried electrodes in order to obtain a lower earth resistance.
