ATLINE
Modular overvoltage protector for data lines for DIN rail.
Technical data
- Protection for data lines and the digital or analogical equipment connected to them (computers, PLCs, load cells etc.).
- Wide variety of protectors for different working voltages.
- Both common and differential protection recommended for this type of line.
- Connects up to two pairs of lines that are very small in size (0.75 DIN).
- Includes removable module that can be replaced in the event of a breakdown or fault without needing to disconnect the wiring. The power supply is not interrupted when replacing the module.
- It has a radiofrequency receptor in order to carry out maintenance using only an emitter kit. When the RF SPD Tester is applied and the protector is working, the LED flickers green. If the cartridge is damaged, the LED does not light up.
- Earthing system is introduced through a metal sheet opposite to the fixing on the DIN rail.
- In normal conditions, it remains inactive without affecting line operation or producing any leakages.
- Discharge takes place in internal encapsulated elements with no external flash.
- Low residual voltage for all operating voltages.
- Very fast response time.
- Mechanical connection of conductors using screws, in order to absorb a higher amount of overvoltage. 0
- ATLINE series protectors have been tested in official, independent laboratories obtaining their characteristics according to applicable standards.
Selection filters: Select product resources
Listado de productos según su selección
| Reference | Name |
|---|