ATSHOCK T 25
Technical data
- Tested and certified as a type 1 and 2 protector according to the standard EN 61643-11 and GUÍA-BT-23 from the REBT. Suitable for categories I, II, III and IV equipment according to the REBT.
- Double connection in order to facilitate wiring (limited to 63 A).
- Multi-pole protection.
- Can be coordinated with other ATSUB and ATCOVER series protectors.
- Short response time.
- Do not produce deflagration.
- Their activation causes no interruption in power supply.
- Compact protection.
- High energy diverting capacity.
- Limits following current supply.
- Test button for checking protector status. Green light indicates correct operation. If not, replace.
- This indicator does not generate any fault current during normal operation.
- Complies with IBERDROLA requirements for type 1 overvoltage protection on the Meter Board.
- ATSHOCK series protectors have been tested in official, independent laboratories obtaining their characteristics according to applicable standards.
Selection filters: Select product resources
Listado de productos según su selección
Reference | Name |
---|